In brief, the other specifications are :Must be able to handle up to 2 kVA loadsMust achieve a power density of equal to or greater than 50 W/in3Must be able to handle loads with power factors from 0.7–1, leading and lagging in an islanded modeMust be in a rectangular metal enclosure of no more than 40 in3Will be taking in 450 V DC power in series with a 10 Ω resistorMust output 240 V, 60 Hz AC single phase powerMust have a total harmonic distortion + noise on both voltage and current of < 5%Must have an input ripple current of < 20%Must have an input ripple voltage of < 3%Must have a DC-AC efficiency of greater than 95%Must maintain a temperature of no more than 60°C during operation everywhere on the outside of the device that can be touched.Must conform to Electromagnetic Compliance standards as set out in FCC Part 15 BCan not use any external source of cooling (e.g. water) other than airDoes not require galvanic isolation
elektronik-forum.dk: Total antal medlemmer: 677